Putting your new Freebord together.....

Click here to buy the latest Freebords

This should only take a few minutes, but don't rush it and check things are tight before use.

Mounting the Trucks

1. Find 8 Pre-drilled mounting holes on underside of deck that match hole configuration of your trucks.
2. Poke holes through griptape with allen key provided.
3. Insert 8 mounting bolts through holes on top side of deck.
4. Mount trucks to bottom of deck with centre wheels facing inwards.
5. Tighten all 8 truck bolts firmly (bolt heads should be flush with top of deck)

Mounting the Bindings

1. Determine which pre drilled mounting holes best match your stance.
2. Poke holes through griptape with allen key provided.
3. Insert 4 mounting bolts through holes on bottom side of deck.
4. Mount bindings to top of deck and tighten nuts firmly (bolt heads should be flush with deck)
5. If using S2 bindings adjust angle of bindings to desired position before tightening nuts.
6. Mount upper portions of S2 bindings onto steel base and adjust using height adjust screws.

Check out the following Learn to Ride Film for advice on how to get the most from your Freebord